Never-Fail Fudge – A Mid-Century Christmas Recipe Re-Run - Mid-Century Menu (2024)

FAQs

Why won't my condensed milk fudge set? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Allow the fudge mixture to rest until the temperature registers between 150°-160°. Once the desired temperature is reached, beat the ever-loving stuffing out of the fudge. Two to three minutes of hardcore mixing (by hand). This is where you earn the right to eat half of the batch.

OPTION 3) Sieve together some powdered sugar and cocoa powder, and gradually work this into your unset fudge until it reaches the consistency of dough, then roll out and cut into squares, or shape into balls and then roll in powdered sugar (roll the balls in icing sugar, not yourself).

there is too much leftover water in the syrup and the resulting fudge is soft. To save the fudge, put it in a saucepan with 15 to 30 ml (1 or 2 tbsp.) of 35% cream and bring to a boil, stirring until the sugar is completely melted. Then let it boil until the thermometer reaches 114 to 115 °C (237 to 239 °F).

Don't Substitute One for the Other

Thus, using condensed milk in a recipe that requires evaporated milk will yield an overly sweet dish.

– There are a number of reasons why the fudge was grainy. It might be that you haven't dissolved all the sugar before boiling the fudge mixture. It could be that there just wasn't enough fluid or fat to enable the sugar to dissolve or it might even be that the fudge wasn't beaten long enough or hard enough.

Beat the mixture

After letting the fudge cool, it's time to beat it. It is important to stir constantly with a wooden spoon until the mixture starts to thicken and its surface starts to look dull or matte. Now is the time to stop beating and pour the fudge into a mould.

While beating by hand is the traditional method, you can use an electric mixer if you have one. Fit the mixer with the paddle attachment and turn it on medium. Beat it just until it starts to thicken and lose its gloss. It is easy to overbeat fudge with a mixer, so watch it carefully and check it after every minute.

It's not brittle or crumbly, at least not unpleasantly so. By cooling the fudge prior to agitation (like in the recipes included in this article), on the other hand, you'll get much smaller, finer sugar crystals and a finished fudge with a smooth, creamy texture.

What temperature should fudge be cooked at? ›

Stir the ingredients to dissolve the sugar until the mixture comes to a boil. If your recipe uses milk, stirring will keep the mixture from curdling. But once it reaches about 236–238 degrees F/113–114 degrees C (the "soft-ball" stage), do not stir it or even shake the pan.

If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

Candy that isn't cooked long enough will end up too soft; overcooking makes fudge crumbly or hard. High-quality fudge has many small crystals. If the process of crystallization begins too early, fewer crystals form and they become much larger.

Once a seed crystal forms, it grows bigger and bigger as the fudge cools. A lot of big crystals in fudge makes it grainy. By letting the fudge cool without stirring, you avoid creating seed crystals.

If the fudge is very soft and slightly chewy then it is possible that it did not quite cook to soft ball stage and next time the mixture should be cooked to a slightly higher temperature (soft ball is 112-116c/235-240F and a sugar or candy thermometer can help).

Conversely, if the cooking time is too brief and there is not enough evaporation, too much water will remain and the fudge will be too soft. A temperature of 112°C to 114°C (234°F to 237°F) must be maintained. This will ensure the fudge has the ideal concentration of water and sugar.

If your condensed milk doesn't thicken after a couple of hours, it means you removed the pan from the heat early. You can pour the mixture into a small pan and carefully continue to reduce the mixture.

Fudge usually behaves this way when it's not cooked to a high enough temperature (due to oversight or a faulty candy thermometer). If your fudge is tough, hard, or grainy, then you may have made one of several mistakes: You may have overcooked it, beaten it too long, or neglected to cool it to the proper temperature.

au's Digital Food Director, Amira Georgy, said: “It's made of full-cream cow's milk that has been heated to remove some of the water content and, as the name suggests, sugar is added to the reduced milk in order to prolong its shelf life and to give it a thicker consistency.”